It appears that your cart is currently empty
FREE SHIPPING WITHIN THE US • REQUEST A FREE CONSULTATION >
Fume Hoods and Laboratory Exhaust Fan Solutions
High Chemical Resistance + Reliability + Cost Effectiveness = Plastec
Plastec Ventilation is one of the few manufacturers who specializes in chemical and corrosion-resistant blowers, fans, and other HVAC accessories. We are the leader in supplying polypropylene blowers to the fume hood industry.
Plastec products are made from a polypropylene thermal plastic which is the most resistant material against corrosive gases. Our blowers are ½ the weight and ½ the cost of alternative materials such as fiberglass and stainless steel. They can be mounted on the roof, sidewall or even on the top of the fume hood-see photo 3. If the experts in the manufacture of fume hoods rely on Plastec, why wouldn’t you?
After all, if your hood is made of polypropylene, why would you use an inexpensive steel fan that won’t last and not protect your technicians.
Plastec Blowers/Fans are a perfect solution for:
- Ductless fume hood
- Chemical fume hood
- ADA Fume Hood
- Canopy fume hood
- Biosafety cabinets
- Extractor Arm
- Low Air Flow fume
- Variable Air Volume Fume Hood
- Walk in Fume Hood
- Radioisotope Fume Hood
- Polypropylene Fume Hood
Plastec 25 Direct Drive Forward Curve Polypropylene Blower
Plastec 25 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 25 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Plastec 25 Performance & Dimensional Specifications PDF Static Pressure Range: 0.5 to 8 WG Flow Range: 295 to 2060 CFM VFD Motors Option: Yes Phase and Voltage: Single 115/230...
From $2,277.00
Plastec 15 Direct Drive Forward Curve Polypropylene Blower
Plastec 15 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 15 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance Plastec 15 Performance & Dimensional Specifications PDF Static Pressure Range: 0.1 to 2.4 WGFlow Range: 30 to 530 CFMVFD Motors Option: YesPhase and Voltage: Single 115/230V &a...
From $1,364.00
Plastec 20 Direct Drive Forward Curve Polypropylene Blower
Plastec 20 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 20 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Plastec 20 Performance & Dimensional Specifications PDF Static Pressure Range: 0.6 to 6 WG Flow Range: 118 to 1060 CFM VFD Motors Option: Yes Phase and Voltage: Single 115/230...
From $1,661.00
Plastec 30 Direct Drive Forward Curve Polypropylene Blower
Plastec 30 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 30 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Plastec 30 Performance & Dimensional Specifications PDF Static Pressure Range: 0.5 to 3 WG Flow Range: 415 to 3120 CFMVFD Motors Option: YesPhase and Voltage: Single 115/230V ...
From $2,750.00
Plastec 35 Direct Drive Forward Curve Polypropylene Blower
Plastec 35 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 35 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Plastec 35 Performance & Dimensional Specifications PDF Static Pressure Range: 0.5 to 5.25 WG Flow Range: 1060 to 5885 CFM VFD Motors Option: Yes Phase and Voltage: Three 230...
From $5,940.00
Plastec 50 Direct Drive Forward Curve Polypropylene Blower
Plastec 50 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 50 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. The 3 phase 6 pole motors comes with a VFD and can meet explosive resistant applications. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Plastec 50 Performance & Dimensional Specifications PDF Static Pressure Range: 2.8 to...
$9,912.55
Jet 20 Inline Polypropylene Blower
Jet 20 - This nicely packaged low noise unit as low at 64dB comes with an integrated weather hood...
Jet 20 - This nicely packaged low noise unit as low at 64dB comes with an integrated weather hood, drain plug and a disconnect. Easy to install and is roof or wall mounted. Common applications are fume cabinet exhaust, water treatment, tank exhausts, and marine and salty environments as well as others. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Jet 20 Performance & Dimensional Specifications PDF Static Pressure Range: 0.3 to 3.5 WG Flow Range: 300 to 800 CFM P...
From $3,190.00
Jet 25 Inline Polypropylene Blower
Jet 25 - This nicely packaged low noise unit as low at 70dB comes with an integrated weather hood...
Jet 25 - This nicely packaged low noise unit as low at 70dB comes with an integrated weather hood, drain plug and a disconnect. Easy to install and is roof or wall mounted. Common applications are fume cabinet exhaust, water treatment, tank exhausts, and marine and salty environments as well as others. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Jet 25 Performance & Dimensional Specifications PDF Static Pressure Range: 0.75 to 8.25 WG Flow Range: 425 to 1000 CFM ...
From $4,004.00
Jet 30 Inline Polypropylene Blower
Jet 30 - This nicely packaged low noise unit as low at 77dB comes with an integrated weather hood...
Jet 30 - This nicely packaged low noise unit as low at 77dB comes with an integrated weather hood, drain plug and a disconnect. Easy to install and is roof or wall mounted. Common applications are fume cabinet exhaust, water treatment, tank exhausts, and marine and salty environments as well as others. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Jet 30 Performance & Dimensional Specifications PDF Static Pressure Range: 0.75 to 3 WG Flow Range: 1000 to 1800 CFM P...
From $4,785.00
More Than 1000+ Customers
in 80+ Countries
Leader in Anti-Corrosive Fans
with 50 Years of Experience
In-Stock Systems that Ship
within 2 Days
Expert Customer Support
and Maintenance
Plastec Ventilation Inc has extensive experience in the field of fume extraction systems. We offer a comprehensive line of high-quality chemical, corrosion, and even carbon-impregnated explosion resistant polypropylene fans and blowers dedicated to the needs of the industry.
Our products are built to last and highly cost-effective, which makes them the perfect solution for many applications that require fume
exhaust extraction. Some examples include ventilation of acid or chemically-based manufacturing processes, laboratories, water or wastewater treatment, hospitals, medical facilities, educational institutions, chemical production, fume hoods, natatoriums, vehicle exhaust, and much more.
Our plastic polypropylene (and Stainless Steel) fans are typically installed in highly aggressive environments where even metal, FRP fans
(with epoxy coatings), and others will fail.
In 2007, we added Electro Polished 316 Stainless Steel blowers to our product line, as well as Laboratory Hood Air Flow Controls and Monitors with a series of Inverter/VFD Drives. We also offer a Carbon Fiber Impregnated Polypropylene Housing for explosive atmosphere applications.
